RJ45 to RJ11 Converter Adapter Connector M/F Cable,Uvital Telephone RJ11 6P4C Female to Ethernet RJ45 8P8C Male Converter Cord(2 Pack)

Product Information

Although RJ-45 and RJ-11 connectors are generally not compatible, there may be occasions when you can convert a cable with RJ-45 connectors to an RJ-11 jack. To achieve a delay free use of your PS4, you will need a proper ethernet network cable installation(CAT5e, CAT6 or CAT6a).

I am assuming you use it for gaming and video streaming and you would like to enjoy a delay free experience. If the cable is solid with a matching stripe (Blue with a white stripe and white with a blue stripe twisted together, even better). Flatten out the wires so they will fit into the connector, and cut the wires evenly, abouot one inch from the end of the wire casing.If you need to use a length of cable with RJ-45 connectors in an RJ-11 application, you can purchase an adapter. For 10/100 Ethernet to work, you need to have a straight through connection of pins 1, 2, 3, and 6, and the other pins are not relevant/not used in this scenario. Connect both ends of the cable the same to an RJ45 JACK (do not crimp ends on the cable), essentially we are going to substitute color pairs of the existing cable for "standard" color codes in EIA/TIA 568B color code. All three jack types are used to connect phones—for one-, two-, and three-line service respectively.

They are used to connect a phone line with the key telephone system, small exchange-like systems used by businesses to connect to the carrier on the outside and create a network of phones and extensions on the inside. In theory, telephony cable can be used to support 10/100 connections (not Gigabit) over short distances. RJ12 connectors can be used in place of RJ11 because RJ12 has all the connectors RJ11 needs (plus 4 extra). With only 2 of the 6 available connection points, the RJ11 plug supports limited-bandwidth applications. The twists are important because they help cancel electrical noise that is inherent in electrical cables.

RJ-45 connectors are usually attached to a CAT-5 or Cate-5e cable with eight wires, commonly used in computer networking. Using 8 contacts allows for greater bandwidth so RJ45 is used for data-intensive applications like Ethernet and can support bandwidth up to 10Gbps.